Do bricklayers need SWMS?

Yes, when bricklaying involves working at heights of 2 metres or more (e.g. from scaffolding), it is classified as high-risk construction work under WHS Regulations s.291 and a SWMS is legally required.

What hazards do bricklaying SWMS cover?

Our documents cover falls from scaffolding, musculoskeletal injuries from repetitive heavy lifting, silica dust exposure from cutting bricks and blocks, cement burns, falling objects, and manual handling of heavy lintels and masonry units.

Are retaining wall SWMS included?

Yes. The pack includes a dedicated SWMS for retaining wall construction covering excavation, formwork, reinforcement placement, and backfilling — each with specific hazard controls.

Bricklaying & Masonry Induction

Brick and block laying, stone work, retaining walls, and lintels

Bricklaying & Masonry Complete Pack

8 documents — everything you need for bricklaying & masonry compliance.

$150 $127 Save $22 — 15% off ends 30 June 2026 Buy Complete Pack See a sample first →

Not the right fit? Refund available if documents don't match your trade.

Also available for Bricklaying & Masonry: SWMS — from $67.96 JSA — from $16.96 Toolbox Talk — from $21.21 Risk Assessment — from $33.96 SOP — from $33.96 Emergency — from $42.46

Bricklaying and masonry work involves significant manual handling, working at heights on scaffolding, and exposure to silica dust — all requiring careful hazard management under WHS legislation.

Our bricklaying SWMS pack covers 8 work activities including brick and block laying, stonework installation, retaining wall construction, lintel placement, and working from scaffolding. Each document addresses hazards such as musculoskeletal injuries from repetitive lifting, falls from scaffolding, silica dust from cutting bricks and blocks, and struck-by injuries from falling masonry.

Key Hazards Covered

Musculoskeletal injuries from repetitive heavy lifting
Falls from scaffolding and elevated platforms
Silica dust from cutting bricks and blocks
Struck by falling masonry or materials
Cement burns and dermatitis
Manual handling of heavy lintels

Relevant Australian Standards

AS 3700 Masonry structures
AS/NZS 1576 Scaffolding
AS/NZS 4994.1 Temporary edge protection
AS/NZS 1715 Respiratory protective devices

Individual Documents — $21.21 each

	Document	Price
	Brick and Block Wall Construction — Safe Work Method Statement Covers standard clay brick and concrete block wall construction including single and double skin walls, cavity walls, face brickwork, and common brickwork for residential and commercial buildings. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 291(1)(a) - Risk of fall of 2m or more PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Concrete Block Wall Construction — Safe Work Method Statement Covers construction of loadbearing and non-loadbearing concrete block (masonry unit) walls including core-filled and reinforced blockwork compliant with AS 3700. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 291(1)(a) - Risk of fall of 2m or more PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Natural and Manufactured Stone Installation — Safe Work Method Statement Covers installation of natural stone (sandstone, bluestone, granite, limestone) and manufactured stone veneer on walls, columns, and facades including wet-bed and adhesive-fixed applications. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 291(1)(a) - Risk of fall of 2m or more PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Masonry Retaining Wall Construction — Safe Work Method Statement Covers construction of masonry retaining walls including concrete block, besser block, and stone retaining walls with reinforcement, drainage, and backfilling operations compliant with AS 3700. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 306 - Excavation work PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Steel and Concrete Lintel Placement — Safe Work Method Statement Covers the installation of steel angle lintels, galvanised steel lintels, and precast concrete lintels over door and window openings in masonry walls. What's inside this document 4 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Mortar and Grout Mixing and Handling — Safe Work Method Statement Covers the mixing, handling, and application of cement mortar, lime mortar, and grout for bricklaying and masonry operations including use of electric mixers and manual mixing. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Brick and Block Cutting with Saws — Safe Work Method Statement Covers the cutting of clay bricks, concrete blocks, and pavers using masonry bench saws, demolition saws, and angle grinders with diamond blades including wet and dry cutting operations. What's inside this document 5 work steps 9 hazards identified 9 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 213 - Guarding PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Chimney and Fireplace Masonry Construction — Safe Work Method Statement Covers construction of masonry chimneys, flues, and fireplaces including firebrick lining, chimney pot installation, and flashing works on residential and commercial buildings. What's inside this document 6 work steps 10 hazards identified 10 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Reg 36 - Duty to identify hazards WHS Reg 2011, Reg 39 - Duty to maintain control measures WHS Reg 2011, Reg 291(1)(a) - Risk of fall of 2m or more PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21