Standard Operating Procedures for Every Trade
Standard Operating Procedures (SOPs) provide step-by-step instructions for completing work tasks safely and consistently. They bridge the gap between a risk assessment (which identifies hazards) and on-the-ground execution. Our SOP documents integrate safety controls directly into each procedural step, ensuring workers follow safe practices as part of their normal workflow rather than treating safety as a separate consideration.
Choose Your Trade
Select your trade to view SOP documents and pricing
Carpentry
Framing, formwork, trusses, decking, fit-out, and heights
Concreting
Formwork, pouring, finishing, post-tensioning, and tilt-up/precast
Bricklaying & Masonry
Brick and block laying, stone work, retaining walls, and lintels
Scaffolding & Access
Scaffold erection and dismantling, working platforms, and edge protection
Demolition
Residential, commercial, asbestos, excavation, and hazmat removal
Civil Works
Road works, drainage, kerbing, stormwater, and earthmoving
Painting
Interior, exterior, lead paint, spray painting, and heights
Plastering
Plasterboard, fire-rated systems, rendering, and wet areas
Flooring
Timber, carpet, vinyl, concrete grinding, and epoxy coatings
Tiling
Floor tiling, wall tiling, wet area tiling, and large-format tiles
Glazing
Window and door glass installation, curtain walling, and skylights
Insulation
Thermal insulation, acoustic insulation, sarking, and wall wrapping
Waterproofing
Membrane application, wet area waterproofing, balcony, and roof membranes
Electrical / HVAC / Solar
Electrical rough-in, switchboards, solar, AC, ventilation, and cabling
Plumbing
Hot water, drainage, gas fitting, confined spaces, and excavation
Fire Protection
Fire services, sprinkler systems, fire door installation, and detection
Roofing
Roof tiling, sheeting, restoration, gutters, and height safety
Welding & Hot Work
Arc welding, gas cutting, grinding, brazing, and hot work permits
Landscaping
Earthworks, retaining walls, irrigation, paving, and tree work
Fencing
Timber, metal, and glass fencing, post hole boring, and pool fencing
Signage & Line Marking
Traffic management, road signage, car park marking, and wayfinding
Swimming Pool Construction
Pool excavation, steel fixing, plumbing, tiling, and pool fencing
Site-Ready in 3 Steps
Standard Operating Procedures — Common Questions
What is the difference between a SOP and a SWMS?
A SOP provides step-by-step instructions for completing a task safely. A SWMS is a legal document specifically for high-risk construction work that focuses on hazard identification and risk control. SOPs are broader and apply to all tasks, not just HRCW.
Why do I need SOPs if I have SWMS?
SWMS only cover high-risk construction work. SOPs cover all tasks, including routine operations, equipment use, and procedures that don't qualify as HRCW but still need standardised safe practices.
Are your SOPs trade-specific?
Yes. Each SOP is written for specific trade activities, with relevant safety controls, PPE requirements, and references to applicable Australian Standards.
Audited Against Australian WHS/OHS Legislation
Every document is internally audited against national WHS/OHS legislation and relevant AS/NZS standards to ensure legislative alignment. Found something that needs updating? Let us know and we'll fix it at no cost.