Solar Panel Installation (Roof Mount) — Job Safety Analysis

Safe work procedures for the installation of roof-mounted photovoltaic solar panel systems including racking, panel mounting, DC wiring, and inverter connection on residential and commercial rooftops.

A Job Safety Analysis (JSA) breaks each work task into steps, identifies hazards at each step, and lists practical control measures. Unlike a full SWMS, a JSA is a streamlined tool ideal for daily pre-start meetings, toolbox talks, and routine risk assessments. Our JSA documents are built from the same hazard data as our SWMS, ensuring consistency across your safety documentation. Each JSA includes risk ratings and references to relevant Australian Standards.

A JSA does not replace a SWMS where one is legally required. This activity falls under high-risk construction work, so a Safe Work Method Statement is required under the WHS Regulations in addition to this JSA. See the Electrical / HVAC / Solar SWMS for this task →

5 work steps 7 hazards identified 7 control measures 6 PPE items specified 6 AS/NZS standards cited 5×5 risk matrix Worker sign-off section

Legislation Referenced

WHS Reg 2011, Reg 78 (falls) WHS Reg 2011, Reg 147 (electrical work) WHS Reg 2011, Reg 291 (SWMS for high risk)

PPE Requirements

Full body harness with energy absorbing lanyard (AS/NZS 1891.1) Insulated gloves (1000 V DC rated) (AS/NZS 2225) Hard hat (AS/NZS 1801) Safety glasses (AS/NZS 1337.1) Safety footwear (non-slip sole) (AS/NZS 2210.3) High-visibility vest (AS/NZS 4602.1)

Australian Standards Referenced

AS/NZS 5033 — Installation and safety requirements for photovoltaic (PV) arrays AS/NZS 3000 — Wiring Rules AS/NZS 3008 — Electrical installations – Selection of cables AS/NZS 1891.1 — Industrial fall-arrest systems and devices AS/NZS 1891.4 — Industrial fall-arrest systems and devices – Selection, use and maintenance AS/NZS 2225 — Insulating gloves for electrical purposes

$16.95

Buy This Document Buy Complete Electrical / HVAC / Solar Pack — Save $81

WHS Legislation Referenced Editable Word Format Instant Download

See a sample document →

Not sure your existing jsa is compliant? Run the free WHS compliance check →

Also Available As

SWMS — $67.95 Toolbox Talk — $20.95 SOP — $33.95

Using This JSA On Site

Work through the JSA at the start of the shift, in front of the crew, before the task begins. Read the steps out, confirm the controls are actually in place that day, write anything site-specific into the blank rows, and have everyone sign on. Keep it alongside your SWMS rather than instead of it.

JSA — Common Questions

What is the difference between a JSA and a SWMS?

A SWMS is a legal requirement for high-risk construction work and must include detailed control measures and worker sign-off. A JSA is a simplified hazard analysis used for daily planning, toolbox meetings, and non-HRCW tasks. Many businesses use both.

When should I use a JSA?

Use a JSA for daily pre-start meetings, when introducing new workers to a task, for non-high-risk activities, or as a quick reference during toolbox talks.

Can a JSA replace a SWMS?

No. If the work is classified as high-risk construction work under WHS Regulations, a SWMS is legally required. A JSA complements a SWMS but cannot replace it for HRCW.