SOP — Emergency and Exit Lighting Installation
Standard Operating Procedures (SOPs) provide step-by-step instructions for completing work tasks safely and consistently. They bridge the gap between a risk assessment (which identifies hazards) and on-the-ground execution. Our SOP documents integrate safety controls directly into each procedural step, ensuring workers follow safe practices as part of their normal workflow rather than treating safety as a separate consideration.
PPE Requirements
Australian Standards Referenced
Not sure your existing sop is compliant? Run the free WHS compliance check →
Also Available As
Using This SOP On Site
Keep the SOP with the equipment or at the workstation it covers. Use it to train new starters, to settle disagreements about the right way to do the job, and as the reference when a client or principal contractor asks how your team performs the task consistently.
SOP — Common Questions
What is the difference between a SOP and a SWMS?
A SOP provides step-by-step instructions for completing a task safely. A SWMS is a legal document specifically for high-risk construction work that focuses on hazard identification and risk control. SOPs are broader and apply to all tasks, not just HRCW.
Why do I need SOPs if I have SWMS?
SWMS only cover high-risk construction work. SOPs cover all tasks, including routine operations, equipment use, and procedures that don't qualify as HRCW but still need standardised safe practices.
Are your SOPs trade-specific?
Yes. Each SOP is written for specific trade activities, with relevant safety controls, PPE requirements, and references to applicable Australian Standards.