Tiling SOP
Floor tiling, wall tiling, wet area tiling, and large-format tiles
Tiling Complete Pack
8 documents — everything you need for tiling compliance.
Not sure your current documents are compliant? Run the free WHS compliance check →
Tiling work involves significant silica dust exposure from cutting tiles, chemical exposure from adhesives and grouts, and ergonomic hazards from prolonged kneeling and manual handling of heavy tiles.
Our tiling SWMS pack covers 8 activities including floor tiling, wall tiling, wet area waterproofing and tiling, large-format tile installation, tile cutting operations, and grouting. Documents address hazards such as crystalline silica dust from tile cutting, manual handling of heavy large-format tiles, chemical exposure from epoxy grouts, and slip hazards on wet surfaces.
Key Hazards Covered
- Crystalline silica dust from tile cutting
- Manual handling of heavy large-format tiles
- Chemical exposure from epoxy grouts and adhesives
- Prolonged kneeling and ergonomic strain
- Slip hazards on wet tiling surfaces
- Electrical hazards from wet cutting equipment
Relevant Australian Standards
- AS/NZS 3740 Waterproofing of domestic wet areas
- AS/NZS 1715 Respiratory protective devices
- AS/NZS 2161 Occupational protective gloves
- AS/NZS 4586 Slip resistance classification
Individual Documents — $33.95 each
Tiling SOP — Common Questions
What is the difference between a SOP and a SWMS?
A SOP provides step-by-step instructions for completing a task safely. A SWMS is a legal document specifically for high-risk construction work that focuses on hazard identification and risk control. SOPs are broader and apply to all tasks, not just HRCW.
Why do I need SOPs if I have SWMS?
SWMS only cover high-risk construction work. SOPs cover all tasks, including routine operations, equipment use, and procedures that don't qualify as HRCW but still need standardised safe practices.
Are your SOPs trade-specific?
Yes. Each SOP is written for specific trade activities, with relevant safety controls, PPE requirements, and references to applicable Australian Standards.
Last updated: March 2026