Do waterproofers need SWMS?

Yes, when waterproofing involves working at heights (roofs, balconies above 2 metres), using torch-on applications (hot work), or working with flammable membrane products in confined spaces. These activities are high-risk under WHS Regulations s.291.

Is torch-on waterproofing covered?

Yes. Our pack includes a dedicated torch-on membrane SWMS covering hot work permit requirements, fire prevention controls, gas cylinder safety, fire extinguisher placement, and burn injury first aid.

What chemical hazards are addressed?

Our documents cover safe handling of solvent-based primers, polyurethane membranes, and epoxy coatings — including ventilation requirements, PPE selection, SDS compliance, and emergency procedures for chemical exposure.

Waterproofing Induction

Membrane application, wet area waterproofing, balcony, and roof membranes

Waterproofing Complete Pack

6 documents — everything you need for waterproofing compliance.

$112 $95 Save $17 — 15% off ends 30 June 2026 Buy Complete Pack See a sample first →

Not the right fit? Refund available if documents don't match your trade.

Also available for Waterproofing: SWMS — from $67.96 JSA — from $16.96 Toolbox Talk — from $21.21 Risk Assessment — from $33.96 SOP — from $33.96 Emergency — from $42.46

Waterproofing work involves exposure to chemical membranes and solvents, working at heights on roofs and balconies, and operating in confined wet areas — all presenting WHS hazards requiring documented controls.

Our waterproofing SWMS pack covers 6 activities including liquid membrane application, sheet membrane installation, wet area waterproofing, balcony and terrace membranes, roof membrane systems, and torch-on applications. Documents address hazards such as chemical fume exposure, fire risk from torch-on applications, slips on wet membrane surfaces, and working at height on roofs and balconies.

Key Hazards Covered

Chemical fume exposure from membrane products
Fire risk from torch-on membrane applications
Slips on wet membrane surfaces
Falls from height on roofs and balconies
Skin contact with chemical primers and adhesives
Working in poorly ventilated wet areas

Relevant Australian Standards

AS/NZS 4858 Wet area waterproofing
AS/NZS 3740 Waterproofing of domestic wet areas
AS 1940 Storage and handling of flammable liquids
AS/NZS 1715 Respiratory protective devices

Individual Documents — $21.21 each

	Document	Price
	Bathroom and Laundry Waterproofing Membrane Application — Safe Work Method Statement Covers preparation and application of liquid-applied and sheet waterproofing membranes to bathroom, laundry and wet area floors and walls. Includes substrate preparation, priming, membrane application, reinforcing of joints and penetrations, and curing in accordance with AS 3740 and AS/NZS 4858. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 39 - Provision of information, training and instruction WHS Reg 2011, Reg 44 - Duties of persons conducting businesses or undertakings that use hazardous chemicals PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Balcony and Terrace Waterproofing Systems — Safe Work Method Statement Covers application of waterproofing membrane systems to external balconies, terraces and podium decks including substrate preparation, drainage installation, membrane application, and protection screed placement. Includes work at height on external balcony edges in accordance with AS 4654 and AS 3740. What's inside this document 5 work steps 7 hazards identified 7 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 78 - Meaning of high risk construction work WHS Reg 2011, Reg 291(1)(a) - Risk of a person falling more than 2 metres PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Below-Ground and Tanking Waterproofing — Safe Work Method Statement Covers application of below-ground waterproofing membranes and tanking systems to basement walls, retaining walls, lift pits and substructures. Includes cementitious coating, bituminous membrane, sheet membrane and drainage cell installation in accordance with AS 4654 and AS 3740. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 78 - Meaning of high risk construction work WHS Reg 2011, Reg 291(1)(a) - Risk of a person falling more than 2 metres PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Roof Membrane Waterproofing Application — Safe Work Method Statement Covers application of waterproofing membrane systems to flat and low-pitch roofs including torch-on bituminous membrane, cold-applied liquid membrane and single-ply sheet membrane systems. Includes roof access, hot works, and membrane detailing around penetrations and upstands in accordance with AS 4654 and AS/NZS 1891.1. What's inside this document 5 work steps 9 hazards identified 9 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 78 - Meaning of high risk construction work WHS Reg 2011, Reg 291(1)(a) - Risk of a person falling more than 2 metres PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Shower Recess Hob and Waterproofing — Safe Work Method Statement Covers construction of shower hobs, preparation of shower recess substrates, and application of waterproofing membrane systems to shower recesses including floor waste detailing and wall-floor junction treatment in accordance with AS 3740 and AS/NZS 4858. What's inside this document 5 work steps 7 hazards identified 7 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 39 - Provision of information, training and instruction WHS Reg 2011, Reg 44 - Duties of persons conducting businesses or undertakings that use hazardous chemicals PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Waterproofing Inspection and Flood Testing — Safe Work Method Statement Covers visual inspection of waterproofing membranes, dry film thickness testing, flood testing procedures and documentation for compliance certification. Includes inspection of wet areas, balconies, roofs and below-ground waterproofing installations in accordance with AS 3740, AS 4654 and AS/NZS 4858. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 78 - Meaning of high risk construction work WHS Reg 2011, Reg 291(1)(a) - Risk of a person falling more than 2 metres PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21