Waterproofing Risk Assessment
Membrane application, wet area waterproofing, balcony, and roof membranes
Waterproofing Risk Assessment
One document — covers waterproofing for this product type.
Not sure your current documents are compliant? Run the free WHS compliance check →
Waterproofing work involves exposure to chemical membranes and solvents, working at heights on roofs and balconies, and operating in confined wet areas — all presenting WHS hazards requiring documented controls.
Our waterproofing SWMS pack covers 6 activities including liquid membrane application, sheet membrane installation, wet area waterproofing, balcony and terrace membranes, roof membrane systems, and torch-on applications. Documents address hazards such as chemical fume exposure, fire risk from torch-on applications, slips on wet membrane surfaces, and working at height on roofs and balconies.
Key Hazards Covered
- Chemical fume exposure from membrane products
- Fire risk from torch-on membrane applications
- Slips on wet membrane surfaces
- Falls from height on roofs and balconies
- Skin contact with chemical primers and adhesives
- Working in poorly ventilated wet areas
Relevant Australian Standards
- AS/NZS 4858 Wet area waterproofing
- AS/NZS 3740 Waterproofing of domestic wet areas
- AS 1940 Storage and handling of flammable liquids
- AS/NZS 1715 Respiratory protective devices
Individual Documents — $33.95 each
Waterproofing Risk Assessment — Common Questions
What is the difference between a risk assessment and a SWMS?
A risk assessment provides a broad overview of all hazards for a scope of work at a site. A SWMS is task-specific and legally required for high-risk construction work. Both are important but serve different purposes.
Do I need a risk assessment if I have a SWMS?
Yes. A SWMS covers specific high-risk tasks. A site-specific risk assessment covers all hazards at the site, including those not classified as high-risk construction work.
What risk matrix do your assessments use?
Our risk assessments use a 5×5 likelihood-consequence matrix, providing initial risk ratings before controls and residual ratings after controls are applied.
Last updated: March 2026