SOP — Protective Coatings (Industrial)
6 work steps
0 hazards identified
0 control measures
5×5 risk matrix
Worker sign-off section
PPE Requirements
Supplied-air full-face respirator (for isocyanates and blast) (AS/NZS 1716)
Half-face respirator with A1P2 cartridge (AS/NZS 1716)
Type CE blast helmet with air supply (AS/NZS 1716)
Full body harness with twin-tail lanyard (AS/NZS 1891.1)
Class 5 hearing protection (AS/NZS 1270)
Chemical-resistant gloves (nitrile, minimum 0.4mm) (AS/NZS 2161.10)
Disposable coveralls with hood (Type 5/6) (Category III Type 5/6)
Safety goggles (chemical splash) (AS/NZS 1337.1)
Steel-cap metatarsal-guarded boots (AS/NZS 2210.3)
Australian Standards Referenced
AS/NZS 2312 - Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 2312.2 - Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Hot dip galvanizing and duplex systems
AS 1627 - Metal finishing - Preparation and pretreatment of surfaces (series)
AS/NZS 1716 - Respiratory protective devices
AS/NZS 1715 - Selection, use and maintenance of respiratory protective equipment
AS/NZS 1891.1 - Industrial fall-arrest systems and devices: Harnesses and ancillary equipment
AS 1940 - The storage and handling of flammable and combustible liquids
AS/NZS 1270 - Acoustics - Hearing protectors
AS/NZS 1580 - Paints and related materials - Methods of test
$33.96
$39.95
15% off
Buy This Document
Buy Complete Painting Pack — Save $85
WHS Reg s.299 Compliant
Editable Word Format
Instant Download
See a sample document →
Also Available As
More SOP Documents for Painting
$33.96
Buy Now