Do signage installers need SWMS?

Yes, when signage work involves working at heights (elevated signs), working near live traffic, or operating plant equipment (EWPs, cranes). Traffic management during signage installation is also classified as high-risk work.

Is traffic management covered?

Yes. Our pack includes a dedicated traffic management SWMS covering traffic control plans, lane closures, temporary signage requirements, worker visibility, and speed zone management — referenced to AS 1742.

What about thermoplastic line marking?

Our thermoplastic SWMS covers hot material handling, burn prevention, ventilation requirements for fumes, fire safety with heated equipment, and PPE requirements including heat-resistant gloves and respiratory protection.

Signage & Line Marking Emergency

Traffic management, road signage, car park marking, and wayfinding

Signage & Line Marking Complete Pack

6 documents — everything you need for signage & line marking compliance.

$225 $191 Save $34 — 15% off ends 30 June 2026 Buy Complete Pack See a sample first →

Not the right fit? Refund available if documents don't match your trade.

Also available for Signage & Line Marking: SWMS — from $67.96 JSA — from $16.96 Toolbox Talk — from $21.21 Risk Assessment — from $33.96 Induction — from $21.21 SOP — from $33.96

Signage installation and line marking work involves working near live traffic, working at heights for elevated signs, and exposure to chemical paints and thermoplastic materials — all requiring documented safety controls.

Our signage and line marking SWMS pack covers 6 activities including road signage installation, car park line marking, warehouse and wayfinding signage, traffic management during installation, elevated signage (EWP and ladder work), and thermoplastic line marking. Documents address hazards such as live traffic exposure, falls from height, chemical exposure from marking paints, heat burns from thermoplastic application, and working in active roadways.

Key Hazards Covered

Live traffic exposure during road works
Falls from height during elevated sign installation
Chemical exposure from marking paints and solvents
Heat burns from thermoplastic application
Working in active car parks and roadways
Manual handling of heavy sign panels

Relevant Australian Standards

AS 1742 Manual of uniform traffic control devices
AS/NZS 1906 Retroreflective materials and devices
AS/NZS 1891.1 Fall-arrest systems
AS 1940 Storage and handling of flammable liquids

Individual Documents — $42.46 each

	Document	Price
	Traffic and Regulatory Sign Installation — Safe Work Method Statement Safe work procedures for installation of traffic and regulatory signs on public roads and private property including post installation, sign attachment, and compliance with AS 1742 series. What's inside this document 5 work steps 7 hazards identified 7 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.291 (high risk construction work) WHS Reg 2011 r.315 (traffic management) WHS Reg 2011 r.78 (falls — general duty) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46
	Car Park Line Marking and Stencilling — Safe Work Method Statement Safe work procedures for application of line marking paint, thermoplastic markings, and stencils in car parks including disabled bays, directional arrows, speed humps, and pedestrian crossings. What's inside this document 4 work steps 5 hazards identified 5 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) WHS Reg 2011 r.351 (hazardous chemicals — duties of PCBU) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46
	Road Line Marking with Thermoplastic/Paint — Safe Work Method Statement Safe work procedures for road line marking using thermoplastic and cold-applied paint on public roads including centrelines, edge lines, turn lanes, and pedestrian crossings in accordance with AS 1742. What's inside this document 5 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.291 (high risk construction work) WHS Reg 2011 r.315 (traffic management) WHS Reg 2011 r.214 (management of risks to health and safety) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46
	Wayfinding and Directional Signage Installation — Safe Work Method Statement Safe work procedures for installation of wayfinding, directional, and informational signage in commercial buildings, hospitals, shopping centres, and public spaces including wall-mounted, suspended, and free-standing signs. What's inside this document 4 work steps 5 hazards identified 5 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.78 (falls — general duty) WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46
	Elevated and Overhead Sign Installation — Safe Work Method Statement Safe work procedures for installation of elevated signs, overhead gantry signs, pylon signs, and building-mounted signs at height including structural mounting, electrical connections, and crane-assisted installation. What's inside this document 5 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.78 (falls — general duty) WHS Reg 2011 r.79 (falls — minimising risk) WHS Reg 2011 r.291 (high risk construction work) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46
	Workplace Safety Signage and Labelling — Safe Work Method Statement Safe work procedures for installation of workplace safety signs, hazard identification labels, emergency evacuation signs, and safety information boards in industrial and commercial environments to AS 1319. What's inside this document 4 work steps 4 hazards identified 4 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$42.46