Concreting SOP
Formwork, pouring, finishing, post-tensioning, and tilt-up/precast
Concreting Complete Pack
10 documents — everything you need for concreting compliance.
Not sure your current documents are compliant? Run the free WHS compliance check →
Concreting operations involve multiple high-risk construction activities under WHS Regulations s.291, including work near excavations, working at heights during formwork, and handling heavy loads with cranes or concrete pumps.
Our concreting SWMS pack covers 10 work activities from formwork construction and steel reinforcement through to concrete pouring, finishing, post-tensioning, and tilt-up/precast panel installation. Each document addresses hazards specific to concrete work including chemical burns from wet concrete, silica dust exposure, manual handling of heavy materials, and plant/equipment risks.
Key Hazards Covered
- Chemical burns from wet concrete contact
- Silica dust inhalation during cutting and grinding
- Formwork collapse during pouring
- Manual handling of heavy reinforcement steel
- Crane and concrete pump operations
- Working near open excavations
Relevant Australian Standards
- AS 3600 Concrete structures
- AS/NZS 4576 Guidelines for scaffolding safety
- AS 2550 Cranes, hoists and winches
- AS/NZS 1891.1 Fall-arrest systems
Individual Documents — $33.95 each
Concreting SOP — Common Questions
What is the difference between a SOP and a SWMS?
A SOP provides step-by-step instructions for completing a task safely. A SWMS is a legal document specifically for high-risk construction work that focuses on hazard identification and risk control. SOPs are broader and apply to all tasks, not just HRCW.
Why do I need SOPs if I have SWMS?
SWMS only cover high-risk construction work. SOPs cover all tasks, including routine operations, equipment use, and procedures that don't qualify as HRCW but still need standardised safe practices.
Are your SOPs trade-specific?
Yes. Each SOP is written for specific trade activities, with relevant safety controls, PPE requirements, and references to applicable Australian Standards.
Last updated: March 2026