Plastering Toolbox Talk

Plasterboard, fire-rated systems, rendering, and wet areas

Plastering Complete Pack

8 documents — everything you need for plastering compliance.

$126 $167.60 Save $42 Buy Complete Pack See a sample first →

Not the right fit? Refund available if documents don't match your trade.

Not sure your current documents are compliant? Run the free WHS compliance check →

Also available for Plastering: SWMS — from $67.95 JSA — from $16.95 Risk Assessment — from $33.95 Induction — from $20.95 SOP — from $33.95 Emergency — from $41.95

Plastering work triggers SWMS requirements under WHS Regulations s.291 when performed at heights of 2 metres or more, which is common for ceiling work, stairwells, and multi-storey interiors.

Our plastering SWMS pack covers 8 activities including plasterboard installation, fire-rated wall and ceiling systems, cement rendering, cornice installation, wet area preparation, and working from scaffolding and stilts. Documents address hazards such as falls from stilts and scaffolding, manual handling of heavy plasterboard sheets, dust inhalation from sanding, and chemical exposure from adhesives and compounds.

Key Hazards Covered

Falls from stilts, scaffolding and trestles
Manual handling of heavy plasterboard sheets
Dust inhalation from sanding and cutting
Chemical exposure from adhesives and compounds
Musculoskeletal injuries from overhead work
Electrical hazards when working near services

Relevant Australian Standards

AS/NZS 2588 Gypsum plasterboard
AS/NZS 1530.4 Fire-resistance tests for elements
AS/NZS 1576 Scaffolding
AS/NZS 1715 Respiratory protective devices

Individual Documents — $20.95 each

	Document	Price
	Toolbox Talk — Plasterboard Installation (Walls) What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 5 discussion questions 6 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 39 - Provision of information, training and instruction WHS Reg 2011, Reg 49 - Duties of workers PPE Requirements (with AS/NZS standards) P2 respirator (cutting/sanding) (AS/NZS 1716) Safety glasses / goggles (AS/NZS 1337.1) Hearing protection (Class 5) (AS/NZS 1270) Steel-cap safety boots (AS/NZS 2210.3) Riggers gloves (handling) (AS/NZS 2161.3) Nitrile gloves (jointing compound) (AS/NZS 2161.10)	$20.95
	Toolbox Talk — Plasterboard Installation (Ceilings) What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 5 discussion questions 6 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 60 - Hazardous manual tasks WHS Reg 2011, Reg 39 - Provision of information, training and instruction PPE Requirements (with AS/NZS standards) P2 respirator (cutting/sanding) (AS/NZS 1716) Safety goggles (dust-tight) (AS/NZS 1337.1) Hearing protection (Class 5) (AS/NZS 1270) Hard hat (AS/NZS 1801) Steel-cap safety boots (AS/NZS 2210.3) Riggers gloves (AS/NZS 2161.3)	$20.95
	Toolbox Talk — Fire-Rated Plasterboard Systems What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 4 discussion questions 6 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 60 - Hazardous manual tasks WHS Reg 2011, Reg 39 - Provision of information, training and instruction PPE Requirements (with AS/NZS standards) P2 respirator (cutting/sanding) (AS/NZS 1716) Safety goggles (dust-tight) (AS/NZS 1337.1) Hearing protection (Class 5) (AS/NZS 1270) Steel-cap safety boots (AS/NZS 2210.3) Cut-resistant gloves (Level D) (AS/NZS 2161.3) Nitrile gloves (sealants) (AS/NZS 2161.10)	$20.95
	Toolbox Talk — Wet Area Plasterboard Installation What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 4 discussion questions 6 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 351 - Managing risks of hazardous chemicals WHS Reg 2011, Reg 39 - Provision of information, training and instruction PPE Requirements (with AS/NZS standards) P2 respirator (cutting/sanding) (AS/NZS 1716) Safety goggles (dust-tight) (AS/NZS 1337.1) Hearing protection (AS/NZS 1270) Non-slip sole safety boots (AS/NZS 2210.3) Riggers gloves (AS/NZS 2161.3) Nitrile gloves (chemicals) (AS/NZS 2161.10)	$20.95
	Toolbox Talk — Plaster Cornice and Decorative Moulding What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 4 discussion questions 5 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 60 - Hazardous manual tasks WHS Reg 2011, Reg 39 - Provision of information, training and instruction PPE Requirements (with AS/NZS standards) P2 respirator (cutting/sanding) (AS/NZS 1716) Safety glasses / goggles (AS/NZS 1337.1) Hearing protection (AS/NZS 1270) Non-slip sole safety boots (AS/NZS 2210.3) Nitrile gloves (adhesive) (AS/NZS 2161.10)	$20.95
	Toolbox Talk — Solid Plastering/Render (Internal) What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 4 discussion questions 6 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 351 - Managing risks of hazardous chemicals WHS Reg 2011, Reg 60 - Hazardous manual tasks PPE Requirements (with AS/NZS standards) P2 respirator (cement dust) (AS/NZS 1716) Safety glasses / goggles (AS/NZS 1337.1) Alkali-resistant gloves (AS/NZS 2161.10) Cut-resistant gloves (metal beads) (AS/NZS 2161.3) Waterproof / steel-cap safety boots (AS/NZS 2210.3) Hearing protection (mixer/pump) (AS/NZS 1270)	$20.95
	Toolbox Talk — Solid Plastering/Render (External with Scaffold) What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 4 discussion questions 9 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Reg 291(1)(a) - Risk of fall of 2m or more WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 351 - Managing risks of hazardous chemicals PPE Requirements (with AS/NZS standards) P2 respirator (cement dust) (AS/NZS 1716) Safety goggles (AS/NZS 1337.1) Alkali-resistant gloves (AS/NZS 2161.10) Non-slip sole safety boots (AS/NZS 2210.3) Full body harness (secondary protection) (AS/NZS 1891.1) Hard hat (ground personnel) (AS/NZS 1801) Hi-visibility vest (AS/NZS 4602.1) Sun protection (hat, SPF 50+ sunscreen) (N/A) Hearing protection (pump/mixer) (AS/NZS 1270)	$20.95
	Toolbox Talk — Plasterboard Repair and Patching What's inside this document 6 hazards covered 8 controls discussed 5 key talking points 5 discussion questions 5 PPE items specified 15 minute talk Attendance register Legislation Referenced WHS Reg 2011, Part 3.1 - Managing risks to health and safety WHS Reg 2011, Reg 39 - Provision of information, training and instruction WHS Reg 2011, Reg 351 - Hazardous chemicals PPE Requirements (with AS/NZS standards) P2 respirator (AS/NZS 1716) Safety glasses / goggles (AS/NZS 1337.1) Non-slip sole safety boots (AS/NZS 2210.3) Nitrile gloves (AS/NZS 2161.10) Hearing protection (power tools) (AS/NZS 1270)	$20.95

Plastering Toolbox Talk — Common Questions

How often should toolbox talks be held?

Most WHS guidelines recommend weekly toolbox talks, or before any new high-risk activity begins. Regular talks demonstrate ongoing safety consultation with workers.

What topics do your toolbox talks cover?

Each toolbox talk covers trade-specific hazards, safe work procedures, PPE requirements, and emergency protocols relevant to that trade's activities.

Do toolbox talks include an attendance register?

Yes. Every Toolbox Talk document includes an attendance register for worker sign-off, providing evidence of WHS consultation.

Are toolbox talks a legal requirement?

While not explicitly mandated by name, WHS legislation requires PCBUs to consult with workers on safety matters. Documented toolbox talks are the most common way to demonstrate this consultation.

Last updated: March 2026

Plastering Toolbox Talk

Plastering Complete Pack

Individual Documents — $20.95 each

Plastering Toolbox Talk — Common Questions

Other Trades You Might Need