Plastering Risk Assessment
Plasterboard, fire-rated systems, rendering, and wet areas
Plastering Risk Assessment
One document — covers plastering for this product type.
Not sure your current documents are compliant? Run the free WHS compliance check →
Plastering work triggers SWMS requirements under WHS Regulations s.291 when performed at heights of 2 metres or more, which is common for ceiling work, stairwells, and multi-storey interiors.
Our plastering SWMS pack covers 8 activities including plasterboard installation, fire-rated wall and ceiling systems, cement rendering, cornice installation, wet area preparation, and working from scaffolding and stilts. Documents address hazards such as falls from stilts and scaffolding, manual handling of heavy plasterboard sheets, dust inhalation from sanding, and chemical exposure from adhesives and compounds.
Key Hazards Covered
- Falls from stilts, scaffolding and trestles
- Manual handling of heavy plasterboard sheets
- Dust inhalation from sanding and cutting
- Chemical exposure from adhesives and compounds
- Musculoskeletal injuries from overhead work
- Electrical hazards when working near services
Relevant Australian Standards
- AS/NZS 2588 Gypsum plasterboard
- AS/NZS 1530.4 Fire-resistance tests for elements
- AS/NZS 1576 Scaffolding
- AS/NZS 1715 Respiratory protective devices
Individual Documents — $33.95 each
Plastering Risk Assessment — Common Questions
What is the difference between a risk assessment and a SWMS?
A risk assessment provides a broad overview of all hazards for a scope of work at a site. A SWMS is task-specific and legally required for high-risk construction work. Both are important but serve different purposes.
Do I need a risk assessment if I have a SWMS?
Yes. A SWMS covers specific high-risk tasks. A site-specific risk assessment covers all hazards at the site, including those not classified as high-risk construction work.
What risk matrix do your assessments use?
Our risk assessments use a 5×5 likelihood-consequence matrix, providing initial risk ratings before controls and residual ratings after controls are applied.
Last updated: March 2026