Do pool builders need SWMS?

Yes. Pool construction involves multiple high-risk activities including excavation (pools are typically deeper than 1.5 metres), crane lifts for fibreglass shells, confined space work inside pool shells, and working near underground services — all classified under WHS Regulations s.291.

Is fibreglass pool installation covered?

Yes. Our pack includes SWMS for fibreglass pool crane lifting and placement covering crane setup, sling selection, exclusion zones, ground conditions, and coordination between crane operator and ground crew.

What about pool fencing compliance?

Our pool fencing SWMS covers both installation safety and references AS 1926.1 compliance requirements including barrier height, gate self-closing mechanisms, non-climbable zones, and inspection requirements.

Swimming Pool Construction Induction

Pool excavation, steel fixing, plumbing, tiling, and pool fencing

Swimming Pool Construction Complete Pack

8 documents — everything you need for swimming pool construction compliance.

$150 $127 Save $22 — 15% off ends 30 June 2026 Buy Complete Pack See a sample first →

Not the right fit? Refund available if documents don't match your trade.

Also available for Swimming Pool Construction: SWMS — from $67.96 JSA — from $16.96 Toolbox Talk — from $21.21 Risk Assessment — from $33.96 SOP — from $33.96 Emergency — from $42.46

Swimming pool construction involves multiple high-risk activities including excavation deeper than 1.5 metres, working in confined spaces (pool shells), steel fixing, crane operations for precast pools, and plumbing near underground services.

Our swimming pool SWMS pack covers 8 activities including pool excavation, steel reinforcement fixing, concrete pool shell construction, fibreglass pool installation (crane lifting), pool plumbing and filtration, pool tiling, pool fencing, and pool coping and paving. Documents address hazards such as excavation collapse, crane operations, working in confined pool shells, underground service strikes, and drowning risk during water testing.

Key Hazards Covered

Excavation collapse in deep pool digs
Crane operations for fibreglass pool shells
Working in confined pool shell spaces
Underground service strikes during excavation
Steel fixing injuries (cuts, impalement on rebar)
Drowning risk during water filling and testing

Relevant Australian Standards

AS 1926.1 Swimming pool safety — Fencing
AS 2865 Confined spaces
AS 2550 Cranes, hoists and winches
AS/NZS 3500 Plumbing and drainage

Individual Documents — $21.21 each

	Document	Price
	Swimming Pool Excavation and Benching — Safe Work Method Statement Safe work procedures for excavation of swimming pool shells including bulk dig, benching, shaping to design profile, spoil removal, and dewatering operations. What's inside this document 5 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.291 (high risk construction work) WHS Reg 2011 r.306 (excavation work) WHS Reg 2011 r.307 (ground conditions — excavation) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Shell Steel Reinforcement Fixing — Safe Work Method Statement Safe work procedures for installation of steel reinforcement in swimming pool shells including bar bending, placement, tying, and cover verification prior to concrete application. What's inside this document 4 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.306 (excavation work) WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Plumbing and Filtration Pipework — Safe Work Method Statement Safe work procedures for installation of swimming pool plumbing systems including suction and return lines, skimmer boxes, hydrostatic relief valves, filtration pipework, and chemical dosing connections. What's inside this document 5 work steps 5 hazards identified 5 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.306 (excavation work) WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.351 (hazardous chemicals — duties of PCBU) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Shell Concrete (Shotcrete/Gunite) Application — Safe Work Method Statement Safe work procedures for application of shotcrete or gunite to swimming pool shells including surface preparation, shotcrete spraying, trimming, and curing in accordance with AS 3600. What's inside this document 4 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.306 (excavation work) WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Interior Tiling and Coping — Safe Work Method Statement Safe work procedures for installation of pool interior tiles, waterline tiles, and coping stones including surface preparation, adhesive application, tile laying in pool shell, and grouting. What's inside this document 4 work steps 6 hazards identified 6 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) WHS Reg 2011 r.351 (hazardous chemicals — duties of PCBU) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Barrier Fencing to AS 1926.1 — Safe Work Method Statement Safe work procedures for installation of swimming pool barrier fencing including glass panel, aluminium, and steel fencing systems in compliance with AS 1926.1 pool fencing requirements. What's inside this document 5 work steps 7 hazards identified 7 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) WHS Reg 2011 r.39 (provision and use of plant) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Electrical Bonding and Equipment Connection — Safe Work Method Statement Safe work procedures for electrical work associated with swimming pools including equipotential bonding of pool shell reinforcement, connection of pumps, heaters, lighting, and chlorinators in compliance with AS/NZS 3000. What's inside this document 5 work steps 5 hazards identified 5 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.147 (electrical work — general) WHS Reg 2011 r.148 (persons carrying out electrical work) WHS Reg 2011 r.154 (working near energised electrical parts) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21
	Pool Surrounds, Decking, and Landscaping — Safe Work Method Statement Safe work procedures for construction of pool surrounds including concrete paving, timber and composite decking, garden bed construction, retaining walls, and landscape planting around swimming pools. What's inside this document 5 work steps 8 hazards identified 8 control measures 5×5 risk matrix Worker sign-off section Legislation Referenced WHS Reg 2011 r.214 (management of risks to health and safety) WHS Reg 2011 r.213 (duty to identify hazards) WHS Reg 2011 r.39 (provision and use of plant) PPE Requirements (with AS/NZS standards) Hard hat (Type 1) (AS/NZS 1801) Safety footwear (steel cap) (AS/NZS 2210.3) Safety glasses (AS/NZS 1337.1) Hi-visibility vest (Class D/N) (AS/NZS 4602.1) Gloves (task-appropriate) (AS/NZS 2161.1) Australian Standards Referenced AS/NZS 1801 — Occupational protective headwear AS/NZS 2210.3 — Occupational protective footwear	$21.21