Swimming Pool Construction Risk Assessment
Pool excavation, steel fixing, plumbing, tiling, and pool fencing
Swimming Pool Construction Risk Assessment
One document — covers swimming pool construction for this product type.
Not sure your current documents are compliant? Run the free WHS compliance check →
Swimming pool construction involves multiple high-risk activities including excavation deeper than 1.5 metres, working in confined spaces (pool shells), steel fixing, crane operations for precast pools, and plumbing near underground services.
Our swimming pool SWMS pack covers 8 activities including pool excavation, steel reinforcement fixing, concrete pool shell construction, fibreglass pool installation (crane lifting), pool plumbing and filtration, pool tiling, pool fencing, and pool coping and paving. Documents address hazards such as excavation collapse, crane operations, working in confined pool shells, underground service strikes, and drowning risk during water testing.
Key Hazards Covered
- Excavation collapse in deep pool digs
- Crane operations for fibreglass pool shells
- Working in confined pool shell spaces
- Underground service strikes during excavation
- Steel fixing injuries (cuts, impalement on rebar)
- Drowning risk during water filling and testing
Relevant Australian Standards
- AS 1926.1 Swimming pool safety — Fencing
- AS 2865 Confined spaces
- AS 2550 Cranes, hoists and winches
- AS/NZS 3500 Plumbing and drainage
Individual Documents — $33.95 each
Swimming Pool Construction Risk Assessment — Common Questions
What is the difference between a risk assessment and a SWMS?
A risk assessment provides a broad overview of all hazards for a scope of work at a site. A SWMS is task-specific and legally required for high-risk construction work. Both are important but serve different purposes.
Do I need a risk assessment if I have a SWMS?
Yes. A SWMS covers specific high-risk tasks. A site-specific risk assessment covers all hazards at the site, including those not classified as high-risk construction work.
What risk matrix do your assessments use?
Our risk assessments use a 5×5 likelihood-consequence matrix, providing initial risk ratings before controls and residual ratings after controls are applied.
Last updated: March 2026